10.2.1.7 Packet Tracer – Web and Email

This lab is about 10.2.1.7 Packet Tracer – Web and Email . In this tutorial we will discuss about10.2.1.7 Packet Tracer – Web and Email Answers. You may also see the 9.3.1.2 Packet Tracer Simulation – Exploration of TCP and UDP Communications.

10.2.1.7 Packet Tracer Web and Email

Packet Tracer – Web and Email Servers

Objectives

Part 1: Configure and Verify Web Services
Part 2: Configure and Verify Email Services

Background



In this activity of 10.2.1.7 Packet Tracer – Web and Email , you will configure HTTP and email services using the simulated server in Packet Tracer. You will then configure clients to access the HTTP and email services.

Note: Packet Tracer only simulates the process for configuring these services. HTTP and email software packages each have their own unique installation and configuration instructions.

Part 1: Configure and Verify Web Services

Step 1 of 10.2.1.7 Packet Tracer – Web and Email has following Configuration.

Step 1: Configure web services on CentralServer and BranchServer.

a. Click CentralServer and click the Config tab > HTTP.

b. Click On to enable HTTP and HTTP Secure (HTTPS).

c. Optional. Personalize the HTML code.

d. Repeat Step1a – 1c on BranchServer.

Packet Tracer – Web and Email Servers

Packet Tracer – Web and Email Servers

Step 2 of 10.2.1.7 Packet Tracer – Web and Email  is given below.

Step 2: Verify the web servers by accessing the web pages.

There are many endpoint devices in this network, but for the purposes of this step, use PC3.

a. Click PC3 and click the Desktop tab > Web Browser.

b. In the URL box, enter 10.10.10.2 as the IP address and click Go. The CentralServer website displays.

c. In the URL box, enter 64.100.200.1 as the IP address and click Go. The BranchServer website displays.

d. In the URL box, enter centralserver.pt.pka and click Go. The CentralServer website displays.

e. In the URL box, enter branchserver.pt.pka and click Go. The BranchServer website displays.

f. What protocol is translating the centralserver.pt.pka and branchserver.pt.pka names to IP addresses? Domain Name Service (DNS)

Part 2: Configure and Verify Email Services on Servers

Step 1 of 10.2.1.7 Packet Tracer – Web and Email has following Configuration.

Step 1: Configure CentralServer to send (SMTP) and receive (POP3) Email.



a. Click CentralServer, and then select the Config tab followed by the EMAIL button.

b. Click On to enable the SMTP and POP3.

c. Set the domain name to centralserver.pt.pka and click Set.

d. Create a user named central-user with password cisco. Click + to add the user.

Step 2 of 10.2.1.7 Packet Tracer – Web and Email  is given below.

Step 2: Configure BranchServer to send (SMTP) and receive (POP3) Email.

a. Click BranchServer and click the Config tab > EMAIL.

b. Click On to enable SMTP and POP3 .

c. Set the domain name to branchserver.pt.pka and click Set.

d. Create a user named branch-user with password cisco. Click + to add the user.

Step 3 of  10.2.1.7 Packet Tracer – Web and Email  is given below.

Step 3: Configure PC3 to use the CentralServer email service.

a. Click PC3 and click the Desktop tab > E Mail.

b. Enter the following values into their respective fields:

1) Your Name: Central User

2) Email Address: central-user@centralserver.pt.pka

3) Incoming Mail Server: 10.10.10.2

4) Outgoing Mail Server: 10.10.10.2

5) User Name: central-user

6) Password: cisco

c. Click Save. The Mail Browser window displays.

d. Click Receive. If everything has been set up correctly on both the client and server, the Mail Browser window displays the Receive Mail Success message confirmation.

Step 4: Configure Sales to use the Email service of BranchServer.

a. Click Sales and click the Desktop tab > E Mail.

b. Enter the following values into their respective fields:

1) Your Name: Branch User

2) Email Address: branch-user@branchserver.pt.pka

3) Incoming Mail Server: 172.16.0.3

4) Outgoing Mail Server: 172.16.0.3

5) User Name: branch-user

6) Password: cisco

c. Click Save. The Mail Browser window displays.

d. Click Receive. If everything has been set up correctly on both the client and server, the Mail Browser window displays the Receive Mail Success message confirmation.

e. The activity should be 100% complete. Do not close the Sales configuration window or the Mail Browser window.

Step 5: Send an Email from the Sales client and the PC3 client.

a. From the Sales Mail Browser window, click Compose.

b. Enter the following values into their respective fields:

1) To: central-user@centralserver.pt.pka

2) Subject: Personalize the subject line.

3) Email Body: Personalize the email.

c. Click Send.

d. Verify that PC3 received the email. Click PC3. If the Mail Browser window is closed, click E Mail.

e. Click Receive. An email from Sales displays. Double-click the email.

f. Click Reply, personalize a response, and click Send.

g

. Verify that Sales received the reply.

Hamza Arif
Follow us

Hamza Arif

Hey, i hamza arif student of telecommunication from BZU, i am good in Networking, Telecommunication and Web Development working on different projects and try my best to teach them to all of you.
Hamza Arif
Follow us

Leave a comment

Your email address will not be published. Required fields are marked *