10.2.2.7 Packet Tracer – DNS and DHCP Instructions Answers

This lab is about 10.2.2.7 Packet Tracer –DNS and DHCP . In this tutorial we will discuss about 10.2.2.7 Packet Tracer –DNS and DHCP Answers. You may also see the 10.2.1.7 Packet Tracer – Web and Email

10.2.2.7 Packet Tracer – DNS and DHCP

Packet Tracer – DHCP and DNS Servers

Objectives

Part 1: Configure Static IPv4 Addressing

Part 2: Configure and Verify DNS Records

Background

In this activity of 10.2.2.7 Packet Tracer –DNS and DHCP, you will configure and verify static IP addressing and DHCP addressing. You will then configure a DNS server to map IP addresses to the website names.

Note: Packet Tracer only simulates the process for configuring these services. DHCP and DNS software packages each have their own unique installation and configuration instructions.

Part 1: Configure Static IPv4 Addressing



Step 1: Configure the Inkjet printer with static IPv4 addressing.

The step 1 of 10.2.2.7 Packet Tracer –DNS and DHCP includes the following configurations.

The home office computers need to know the printer’s IPv4 address to send information to it. The printer, therefore, must use a static (unchanging) IPv4 address.

a. Click Inkjet and click the Config tab, which displays the Global Settings.

b. Statically assign the Gateway address as 192.168.0.1 and the DNS Server address as 64.100.8.8.

c. Click FastEthernet0 and statically assign the IP address as 192.168.0.2 and the Subnet Mask address as 255.255.255.0.

d. Close the Inkjet window.

Step 2: Configure WRS to provide DHCP services.

The step 2 of 10.2.2.7 Packet Tracer –DNS and DHCP includes the following configurations.

a. Click WRS and click the GUI tab, and maximize the window.

b. The Basic Setup window displays, by default. Configure the following settings in the Network Setup section:

1) Change the IP Address to 192.168.0.1.

2) Set the Subnet Mask to 255.255.255.0.

3) Enable the DHCP Server.

4) Set the Static DNS 1 address to 64.100.8.8.

5) Scroll to the bottom and click Save.

c. Close the WRS window.

Step 3: Request DHCP addressing for the home laptop.

 

The step 3 of 10.2.2.7 Packet Tracer –DNS and DHCP includes the following configurations.

This activity focuses on the home office. The clients that you will configure with DHCP are Home Laptop and Tablet.

a. Click Home Laptop and click the Desktop tab > IP Configuration.

b. Click DHCP and wait until the DHCP request is successful.

c. Home Laptop should now have a full IP configuration. If not, return to Step 2 and verify your configurations on WRS.

d. Close the IP Configuration window and then close the Home Laptop window.

Step 4: Request DHCP addressing for the tablet.



The step 4 of 10.2.2.7 Packet Tracer –DNS and DHCP includes the following configurations.

a. Click Tablet and click the Desktop tab > IP Configuration.

b. Click DHCP and wait until the DHCP request is successful.

c. Tablet should now have a full IP configuration. If not, return to Step 2 and verify your configurations on WRS.

Step 5: Test access to websites.

a. Close the IP Configuration window, and then click Web Browser.

b. In the URL box, type 10.10.10.2 (for the CentralServer website) or 64.100.200.1 (for the BranchServer website) and click Go. Both websites should appear.

c. Reopen the web browser. Test the names for those same websites by entering centralserver.pt.pka and branchserver.pt.pka. Click on Fast Forward Time on the yellow bar below the topology to speed the process.

Part 2: Configure Records on the DNS Server

Step 1: Configure famous.dns.pka with records for CentralServer and BranchServer.

Typically, DNS records are registered with companies, but for the purposes of this activity you control the famous.dns.pka server on the Internet.

a. Click the Internet cloud. A new network displays.

b. Click famous.dns.pka and click the Config tab > DNS.

c. Add the following resource records:

10.2.2.7 Packet Tracer – DNS and DHCP

d. Close the famous.dns.pka window.

e. Click Back to exit the Internet cloud.

Step 2: Verify the ability of client computers to use DNS.

Now that you have configured DNS records, Home Laptop and Tablet should be able to access the websites by using the names instead of the IP addresses. First, check that the DNS client is working properly and then verify access to the website.

a. Click Home Laptop or Tablet.

b. If the web browser is open, close it and select Command Prompt.

c. Verify the IPv4 addressing by entering the command ipconfig /all. You should see the IP address for the DNS server.

d. Ping the DNS server at 64.100.8.8 to verify connectivity.

Note: The first two or three pings may fail as Packet Tracer simulates all the various processes that must occur for successful connectivity to a remote resource.

e. Test the functionality of the DNS server by entering the commands nslookup centralserver.pt.pka and nslookup branchserver.pt.pka. You should get a name resolution showing the IP address for each.

f. Close the Command Prompt window and click Web Browser. Verify that Home Laptop or Tablet can now access the web pages for CentralServer and BranchServer.

Hamza Arif
Follow us

Hamza Arif

Hey, i hamza arif student of telecommunication from BZU, i am good in Networking, Telecommunication and Web Development working on different projects and try my best to teach them to all of you.
Hamza Arif
Follow us

One thought to “10.2.2.7 Packet Tracer – DNS and DHCP”

Leave a comment

Your email address will not be published. Required fields are marked *