11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH

This lab is about 11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH . In this tutorial we will discuss about 11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH. You may also see the 10.3.1.4 Packet Tracer Multiuser – Implement Services – Client Side.



11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH

Addressing Table

11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH

Scenario

The network administrator has asked you to prepare RTA for deployment. Before it can be connected to the network, security measures must be enabled.

Requirements

· Configure IP addressing on PCA according to the Addressing Table.
· Console into RTA from the Terminal on PC-A.
· Configure IP addressing on RTA and enable the interface.
· Configure the hostname as RTA.
· Encrypt all plaintext passwords.

RTA(config)# service password-encryption

· Set a strong secret password of your choosing.
· Set the domain name to RTA.com (case-sensitive for scoring in PT).

RTA(config)# ip domain-name RTA.com

· Create a user of your choosing with a strong password.

RTA(config)# username any_user password any_password

· Generate 1024-bit RSA keys.
Note: In Packet Tracer, enter the crypto key generate rsa command and press Enter to continue.

RTA(config)# crypto key generate rsa

· Block anyone for three minutes who fails to log in after four attempts within a two-minute period.
RTA(config)# login block-for 180 attempts 4 within 120
· Configure the VTY lines for SSH access and use the local user profiles for authentication.



RTA(config)# line vty 0 4
RTA(config-line)# transport input ssh
RTA(config-line)# login local

· Save the configuration to NVRAM.
· Be prepared to demonstrate to your instructor that you have established SSH access from PCA to RTA.

Console into RTA from the Terminal on PC-A

Router>enable

Router#configure terminal
Router(config)#interface gigabitEthernet0/0
Router(config-if)#ip add 192.168.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#hostname RTA
RTA(config)#service password-encryption

RTA(config)#enable secret cl@ss

RTA(config)#ip domain-name RTA.com
RTA(config)#username any_user password cisco
RTA(config)#crypto key generate rsa
How many bits in the modulus [512]: 1024

RTA(config)#login block-for 180 attempts 4 within 120
RTA(config)#line vty 0 4
RTA(config-line)#transport input ssh
RTA(config-line)#login local
RTA(config-line)#exit
RTA(config)#exit

RTA#copy running-config startup-config

Instructions:

11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH

11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH

Hamza Arif
Follow us

Hamza Arif

Hey, i hamza arif student of telecommunication from BZU, i am good in Networking, Telecommunication and Web Development working on different projects and try my best to teach them to all of you.
Hamza Arif
Follow us

Latest posts by Hamza Arif (see all)

One thought to “11.2.4.5 Packet Tracer – Configuring Secure Passwords and SSH”

Leave a comment

Your email address will not be published. Required fields are marked *