This lab is about 11.5.1.2 Packet Tracer – Skills Integration Challenge. In this tutorial we will discuss about 11.5.1.2 Packet Tracer – Skills Integration Challenge. You may also see the 11.4.3.6 Packet Tracer – Troubleshooting Connectivity Issues .


11.5.1.2 Packet Tracer – Skills Integration Challenge



11.5.1.2 Packet Tracer – Skills Integration Challenge

Addressing Table

The Addressing table of 11.5.1.2 Packet Tracer – Skills Integration Challenge

Device Interface IPv4 Address Subnet Mask Default Gateway
IPv6 Address/Prefix IPv6 Link-local
R1 G0/0 192.168.0.1 255.255.255.128 N/A
2001:DB8:ACAD::1/64 FE80::1 N/A
G0/1 192.168.0.129 255.255.255.192 N/A
2001:DB8:ACAD:1::1/64 FE80::1 N/A
G0/2 192.168.0.193 255.255.255.224 N/A
2001:DB8:ACAD:2::1/64 FE80::1 N/A
S0/0/1 172.16.1.2 255.255.255.252 N/A
2001:DB8:2::1/64 FE80::1 N/A
Central S0/0/0 209.165.200.226 255.255.255.252 N/A
2001:DB8:1::1/64 FE80::2 N/A
S0/0/1 172.16.1.1 255.255.255.252 N/A
2001:DB8:2::2/64 FE80::2 N/A
S1 VLAN 1 192.168.0.2 255.255.255.128 192.168.0.1
S2 VLAN 1 192.168.0.130 255.255.255.192 192.168.0.129
S3 VLAN 1 192.168.0.194 255.255.255.224 192.168.0.193
Staff NIC 192.168.0.3 255.255.255.128 192.168.0.1
2001:DB8:ACAD::2/64 FE80::2 FE80::1
Sales NIC 192.168.0.131 255.255.255.192 192.168.0.129
2001:DB8:ACAD:1::2/64 FE80::2 FE80::1
IT NIC 192.168.0.195 255.255.255.224 192.168.0.193
2001:DB8:ACAD:2::2/64 FE80::2 FE80::1
Web NIC 64.100.0.3 255.255.255.248 64.100.0.1
2001:DB8:CAFE::3/64 FE80::2 FE80::1

Scenario / Background

11.5.1.2 Packet Tracer – Skills Integration Challenge, The router Central, ISP cluster and the Web server are completely configured. You have been tasked with creating a new IPv4 addressing scheme that will accommodate 4 subnets using 192.168.0.0/24 network. The IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts. You are also tasked with finishing the basic security settings and interface configurations on R1. Furthermore, you will configure the SVI interface and basic security setting on switches S1, S2 and S3.

Requirements

IPv4 Addressing

  • Create subnets that meet the host requirements using 192.168.0.0/24.
    • Staff: 100 hosts
    • Sales: 50 hosts
    • IT: 25 hosts
    • Guest network to be added later: 25 hosts
  • Document the assigned IPv4 addresses in the Addressing Table.
  • Record the subnet for Guest network: _______________________________________ 192.168.0.224/27

PC Configurations

  • Configure the assigned IPv4 address, subnet mask, and default gateway settings on the Staff, Sales and IT PCs using your addressing scheme.
  • Assign IPv6 unicast and link local addresses and default gateway to the Staff, Sales, and IT networks according to the Addressing Table.

R1 Configurations

  • Configure the device name according to the Addressing Table.
  • Disable DNS lookup.
  • Assign Ciscoenpa55 as the encrypted privileged EXEC mode password.
  • Assign Ciscoconpa55 as the console password and enable login.
  • Require that a minimum of 10 characters be used for all passwords.
  • Encrypt all plaintext passwords.
  • Create a banner that warns anyone accessing the device that unauthorized access is prohibited. Make sure to include the word Warning in the banner.
  • Configure all the Gigabit Ethernet interfaces.
    • Configure the IPv4 addresses according to your addressing scheme.
    • Configure the IPv6 addresses according to the Addressing Table.
  • Configure SSH on R1:
    • Set the domain name to CCNA-lab.com
    • Generate a 1024-bit RSA key.
    • Configure the VTY lines for SSH access.
    • Use the local user profiles for authentication.
    • Create a user Admin1 with a privilege level of 15 using the encrypted password for Admin1pa55.
  • Configure the console and VTY lines to log out after five minutes of inactivity.
  • Block anyone for three minutes who fails to log in after four attempts within a two-minute period.

Switch Configurations

  • Configure the device name according to the Addressing Table.
  • Configure the SVI interface with the IPv4 address and subnet mask according your addressing scheme.
  • Configure the default gateway.
  • Disable DNS lookup.
  • Assign Ciscoenpa55 as the encrypted privileged EXEC mode password.
  • Assign Ciscoconpa55 as the console password and enable login.
  • Configure the console and VTY lines to log out after five minutes of inactivity.
  • Encrypt all plaintext passwords.

 

Running Commands

R1 Configuration




hostname R1
service password-encryptio
security passwords min-length 10
login block-for 180 attempts 4 within 120
enable secret Ciscoenpa55
username Admin1 secret Admin1pa55
no ip domain-lookup
ip domain-name CCNA-lab.com
interface GigabitEthernet0/0
ip address 192.168.0.1 255.255.255.128
ipv6 address FE80::1 link-local
ipv6 address 2001:DB8:ACAD::1/64
no shutdown
interface GigabitEthernet0/1
ip address 192.168.0.129 255.255.255.192
ipv6 address FE80::1 link-local
ipv6 address 2001:DB8:ACAD:1::1/64
no shutdown
interface GigabitEthernet0/2
ip address 192.168.0.193 255.255.255.224
ipv6 address FE80::1 link-local
ipv6 address 2001:DB8:ACAD:2::1/64
no shutdown
banner motd ^CWarning: Unauthorized Access Prohibited!^C
line con 0
exec-timeout 5 0
password Ciscoconpa55
login
line vty 0 4
exec-timeout 5 0
login local
transport input ssh
end

S1 Configuration

hostname S1
service password-encryption
enable secret Ciscoenpa55
no ip domain-lookup
interface Vlan1
ip address 192.168.0.2 255.255.255.128
no shutdown
ip default-gateway 192.168.0.1
line con 0
password Ciscoconpa55
login
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end

S2 Configuration

hostname S2
service password-encryption
enable secret Ciscoenpa55
no ip domain-lookup
interface Vlan1
ip address 192.168.0.130 255.255.255.192
no shutdown
ip default-gateway 192.168.0.129
line con 0
password Ciscoconpa55
login
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end

S3 Configuration

hostname S3
service password-encryption
enable secret Ciscoenpa55
no ip domain-lookup
interface Vlan1
ip address 192.168.0.194 255.255.255.224
no shutdown
ip default-gateway 192.168.0.193
line con 0
password Ciscoconpa55
login
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end



Ali Hassan

Smart, Motivated, Tech_Geek, Versatile, Adrenaline_junkie, Hard_Working 🙂

One thought to “11.5.1.2 Packet Tracer – Skills Integration Challenge”

Leave a comment

Your email address will not be published. Required fields are marked *