This lab is about 126.96.36.199 Packet Tracer – Connecting a Wired and Wireless. In this tutorial we will discuss about 188.8.131.52 Packet Tracer lab in which we connect a wired and wireless network, in last tutorial we discuss about 184.108.40.206 Packet Tracer – Investigating the TCP/IP and OSI Models in Action.
The topology we have about 220.127.116.11 Packet Tracer – Connecting a Wired and Wireless is here, we need a cloud, two routers, one switch, one cable modem, one server, 3 pc, one wireless router, a printer.
The network addressing are given below.
Objectives of 18.104.22.168 Packet Tracer – Connecting a Wired and Wireless
Connect to the Cloud
Connect the cloud with router0
Open the connection media in cisco packet tracer and then select Copper Straight-Through because Cloud is a type of switch. Now connect Router0 F0/0 to Cloud Eth6. If you connect the correct cable it will blink green and turn on.
Connect the cloud to Cable modem
Chose the correct cable to connect Cloud Coax7 to Modem port0, If you connect the correct cable it will blink green and turn on.
Connect to the Router0
Connect the Router0 to Router1
Chose the correct cable to connect Router0 Ser0/0/0 to Router1 Ser0/0. User serial cables to connect bot routers. If you connect the correct cable it will blink green and turn on.
Connect Router0 to netacad.pka
Connect the Router0 F0/1 to netacad.pka F0 with crossed wire. If you connect the correct cable it will blink green and turn on.
Connect Router0 to the Configuration terminal
Connect Router0 Console to Configuration Terminal RS232. If you connect the correct cable it will blink green and turn on.
Connect Remaining devices
Connect Router1 to switch
Router1 F1/0 to Switch F0/1 If you connect the correct cable it will blink green and turn on.
Connect cable modem to wireless router
Chose the correct cable to connect modem port1 to Wireless Router internet port. If you connect the correct cable it will blink green and turn on.
Connect Wireless Router to Family PC
Connect Wireless Router Ethernet 1 to Family Pc. If you connect the correct cable it will blink green and turn on.
Verify the Connection
Test the Connection from family PC to Netacad.pka
- Open the family PC command prompt and ping netacad.pka.
- Open the web browser and the web address http://netacad.pka
Now ping the switch from the Home PC.
- Open the home PC command prompt and pint the switch IP address of the verify the connection.
Open Router0 from the Configuration terminal
- Open the terminal of configuration terminal and accept the default setting.
- Press enter to view the Router0 command prompt.
- Type show ip Interface brief to view interfaces statuses.
Examine the physical topology
Examine the Cloud
- Click the physical Workspace tab.
- Click the home city icon.
- Click the cloud icon. Two wires are connected to the switch in the blue rack.
- Click back to the return Home city.
Examine the Primary Network
- Click the Primary Network icon. Hold the mouse pointer over the various cable. That is located on the table to the right of the blue rack?
- Click back to return to Home City.
Examine the Secondary Network
- Click the secondary Network icon. Hold the mouse pointer over the carious cable why are three two orange cables connected to each device?
- Click back to Home City.
Examine the Home Network
- Why is there an ocal mesh covering the home network?
- Click the Home network icon. Why is there no rack to hold the Equipment?
- Click the logical Workspace tab to return to the logical topology.
Hope you like this article, read more articles related to Cisco Packet tracer Labs and CCNA labs. Keep in Touch!
Latest posts by Hamza Arif (see all)
- 10.2.1.7 Packet Tracer – Web and Email - March 14, 2018
- 22.214.171.124 Packet Tracer Simulation – Exploration of TCP and UDP Communications - March 13, 2018
- 126.96.36.199 Packet Tracer – Skills Integration Challenge - March 12, 2018