Configure VoIP in Cisco Packet Tracer Part 2

VoIP Introduction

Configure VoIP in Cisco Packet Tracer Part 2 so here you will learn that how you can implement VoIP (Voice over IP) in Cisco Packet tracer. Basically VoIP is used to transfer Voice from one place to another place using Data networks. In this tutorial we will create Local VoIP for business use. VoIP historically known to using ip address to connect private branch exchanges (PBXs), however the word is currently used synonymous with IP telephony.




How does VoIP work?

VoIP encapsulates audio with a codec in to data packets, transmits them over an IP system and then unencapsulates back them in to sound at the opposite end of this bond. VoIP end points comprise dedicated desktop VoIP phones, soft phone software running on PCs and mobile phones, and WebRTC-enabled browsers.

VoIP protocols and standards





VoIP endpoints on average utilize global Telecommunication Union (ITU) conventional codecs, including as for instance G.7 11, that’s the standard for transporting uncompressed packets, or G.729, which is the norm for compressed packets. Many tools suppliers also use their very own proprietary codecs. Voice quality may suffer when compression is employed, but compression minimizes bandwidth demands. VoIP on average supports non-voice communications via the ITU T.38 protocol for delivering faxes over a VoIP or IP network in actual moment.




Configure VoIP in Cisco Packet Tracer Part 2

As you see last video: Configure VoIP in Cisco Packet tracer part 1

Now in this tutorial Configure VoIP in Cisco Packet Tracer Part 2, we will configure router setting, Let’s start.

  1. Create sub-interfaces interface fa0/0.10, fa0/0.20, fa0/0.50
  2. Give IP address to sub-interfaces and fa0/0.50 native
  3. now Exclude ip addresses for Data and Voice
  4. Create IP DHCP pool for Data and Voice
  5. Now go to Telephony services and assign max-dn and max-ephones
  6. Now give Source IP and Port 2000
  7. Now go to config mode and Ephone 1, Ephone 2, Ephone 3 and assign them button and Types.
  8. Now you can call.

Thanks for watching if you like it then comment, Keep in touch.

Hamza Arif
Follow us

Hamza Arif

Hey, i hamza arif student of telecommunication from BZU, i am good in Networking, Telecommunication and Web Development working on different projects and try my best to teach them to all of you.
Hamza Arif
Follow us