This lab is about 1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces . In this tutorial we will discuss about 1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces . You may also see the 1.1.2.9 Packet Tracer – Documenting the Network .
1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces
Addressing Table
Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity
Background
Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.
Part 1: Configure IPv4 Addressing and Verify Connectivity
Step 1: Assign IPv4 addresses to R1 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial interface has already configured.
Step 2: Verify connectivity.
PC1 and PC2 should be able to ping each other and the Dual Stack Server.
Part 2: Configure IPv6 Addressing and Verify Connectivity
Step 1: Assign IPv6 addresses to R2 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial interface is already configured.
Step 2: Verify connectivity.
PC3 and PC4 should be able to ping each other and the Dual Stack Server.
Instructions
R1
R1(config)#int g0/0
R1(config-if)#ip add 172.16.20.1 255.255.255.128
R1(config-if)#no shR1(config-if)#int g0/1
R1(config-if)#ip add 172.16.20.129 255.255.255.128
R1(config-if)#no sh
R2
R2(config)#int g0/0
R2(config-if)#ipv6 address 2001:DB8:C0DE:12::1/64
R2(config-if)#no shR2(config-if)#int g0/1
R2(config-if)#ipv6 address 2001:DB8:C0DE:13::1/64
R2(config-if)#no sh
Ali Hassan
Latest posts by Ali Hassan (see all)
- 2.2.2.4 Packet Tracer – Configuring IPv4 Static and Default Routes - July 3, 2018
- 1.3.2.5 Packet Tracer – Investigating Directly Connected Routes - June 23, 2018
- 1.1.4.5 Packet Tracer – Configuring and Verifying a Small Network - June 22, 2018
2 thoughts to “1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces”
Pingback: What is Wireshark? - Troubleshoot Network
Pingback: 1.1.4.5 Packet Tracer – Configuring and Verifying a Small Network